Product Description LINER WIPER PLUG for the Oil and Gas Industry manufactured from Neoprene [BC/BE], SBR and NR Polymer with Aluminium Threaded Inserts as per customer design and specification.

NYLON REINFORCED DIAPHRAGM as per customer's specification and Drawing with close tolerances manufactured from Viton [HK], Nitrile [BG], Polyurethane, Epichlorohydrin [CH] with duly treated reinforced Nylon, Rayon, Polyester, Cotton Fabrics, and bonded with metal washer, for the chemical Industry and special purpose corrosive applications.

Product Description

GAS LIFT VALVE SEALS with PTFE / MGFT and PPS Seals manufactured as per customers specification from Fabric / KEVLAR reinforced with synthetic Rubber, AFLAS or Viton for high temperature, pressure resistance and corrosive conditions.

CEMENTING PLUGS for the Oil & Gas Industry manufactured as per conventional design and Non Rotational Type with Nylon Inserts. These are PDC Types.
Sizes available are 5" - 5 1/2" - 7" - 9 5/8" - 13 3/8" - 185/8" - 20" and combination of 10 3/4" x 9 5/8" manufactured from Neoprene [BC/BE], NBR [BG], NR[AA] polymer with Hard Ebonite NBR Insert instead of aluminum.

PLUNGER CUPS FOR MUD PUMPS with Nylon & Fabric Back Up manufactured from best quality NBR, XNBR, duly moulded as per customers requirements and specifications.

OIL SEALS OR ROTARTY SHAFT SEALS are manufactured in Inch and Metric range from NBR, CPR, FKM and any other polymer desired by the customer. The types available are MI, MIDL, MO, MODL, MOCDL or any other profile and design required by the customer.

Product Description

PACKING ELEMENTS for the Oil & Gas Industry for Hydraulic Packers manufactured as per customer design and requirements from NBR, HNBR, VITON [FKM] and AFLAS Elastomer in the Hardness of 65 - 75 shore A, 85 - 95 shore A as per ASTM specification.
Special Purpose Moulding ensuring high knit and Tear Resistance besides pressure and the Media in which it is operating.
Packing with special treated coatings for rough areas are also in our range of manufacture.

FABRIC COVERED OIL SEALS with PTFE Dust Lip (SPLIT TYPE) manufactured only as per customers' requirements and specifications.
The PTFE Dust Lip acts as a back up and also seals entry of dust particles into the system.
Manufactured from cotton duck fabric layer with sealing lip of NBR, XNBR, PU, CPR and Viton Elastomers moulded to close tolerances.

SWAB CUPS for the Oil & Gas Industry manufactured as per customers drawings and specification reinforced with spring steel wire Insert and Metal Back Up.
The Polymers used in manufacturing this product are Neoprene [BC/BE] Nitrile [BG] or PTFE OUTER CASING for corrosive & high temperature applications for your requirements a sample or a drawing is required for development purpose.

Product Description Manufactured from NBR, HNBR, ECO, VITON, AFLAS bonded with SS316, 304, 4140, 410 Metal plates for High Pressure (5---15K psi) TEMPERATURE and Aggressive working Conditions supplied as per customer design and specifications only.

Manufactured from TREATED HEAVY DUTY COTTON DUCK, NYLON, RAYON, KEVLAR FABRIC and reinforced with BUNA N, NEOPRENE, HNBR, VITON POLYMERS for demanding reciprocating & High Pressure Temperature Applications especially for Expansion Joints.

Supporting Spacer Seals are also supplied from PPS, PTFE, NYLON as per customer requirements.